124
Chapter6 Optional Accessories (Sold Separately)
F3SJ-E/B
User’s Manual
Appendix
Protect Bar (one piece per set, common for emitter/receiver) (Available soon)
Top/Bottom Bracket
Intermediate Bracket
One-touch Bracket
Appearance Model Remarks
F39-PB The suffix in the model name indicates the same 4-digit
number as the protective height (the suffix in the model
name) of the F3SJ-E/B.
Only one Protect Bar is included.(Common for emitter/receiver)
Purchase two sets if both emitter and receiver require the Protect
Bar.
Appearance Model Application Remarks
F39-LJB1 Top/Bottom Bracket
for F3SJ-E/B
Four brackets per set (two brackets for
emitter, two brackets for receiver)
Side mounting and backside mounting
possible
Appearance Model Application Remarks
F39-LJB2 Used in combination
with Top/Bottom
Bracket for F3SJ-E/
B.
This can be used as
a bracket for Free-
Location mounting.
Two brackets per set
Side mounting and backside mounting
possible
The same as the one used with One-touch
Bracket.
Appearance Model Application Remarks
F39-LJB3-M6 One-touch M6
bracket kit for F3SJ-
E/B
Two brackets per set
Side mounting and backside mounting
possible
The set includes the following:
- F39-LJB2: 2 pcs
- F39-LJB3-M6K: 2 pcs
F39-LJB3-M8 One-touch M8
bracket kit for F3SJ-
E/B
Two brackets per set
Side mounting and backside mounting
possible.
The set includes the following:
- F39-LJB2: 2 pcs
- F39-LJB3-M8K: 2 pcs
To Next Page
Loading...
Need help?
General
