Omron fh series Hardware Manual

21
Precautions for Correct Use
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
• When controlling stages and robots using the measurement results from the Sensor Controller (axis
movement output based on calibration and alignment measurement), always take fail-safe measures
within the stage and robot systems, such as checking whether the data obtained from the measure-
ment results is within the range of movement of the stages and robots.
• On a FH Sensor Controller side, supplementary use operations and branches of the FH Sensor Con-
troller to configure a check flow such as “data should not be externally provide if the data is in a range
from-XXXXX to XXXXX” based on the stage/robots range of movement.
• Do not use devices that may require re-recognition of the monitor by the sensor controller.
Re-recognizing the monitor during switch may slow.
Fail-Safe Measures
Connecting the Sensor Controller and Monitor with a Switcher and
Splitter

Omron fh series Specifications

General

Brand	Omron
Model	fh series
Category	Machine Vision Systems
Language	English