Omron NX1P2 series Hardware User Manual

Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504)
for how to make the
setting.
Precautions for Safe Use
• Never short-circuit the battery terminals; never charge the battery; never disassemble
the battery; and never heat or incinerate the battery. Doing any of these may cause
the battery to leak, heat, ignite, or rupture.
•
Dispose of any battery that has been dropped on the floor or otherwise subjected to
excessive shock. Batteries that have been subjected to shock may leak if they are
used.
5 Installation and Wiring
5-36
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)

Omron NX1P2 series Specifications

General

Model	NX1P2 Series
Manufacturer	Omron
Type	Controller
CPU Units	1
Program Capacity	5 MB
Data Memory Capacity	128 KB
Ethernet Ports	1
Serial Ports	1
Built-in EtherNet/IP Port	Yes
Built-in EtherCAT Port	Yes
Built-in USB Port	Yes
SD Memory Card Slot	Yes
USB Port	1
Power Supply Voltage	24 VDC
Programming Language	Ladder, Structured Text, Function Block Diagram
Communication Protocols	EtherNet/IP, EtherCAT, Serial (RS-232C)