Omron NX1P2 series Hardware User Manual

Additional Information
When external power is supplied, or when the power is interrupted, there may be a pulse status
analog output of up to 1 ms. If this status is a problem, take the following measures.
• T
urn ON the power to the CPU Unit, check the operation status, and then turn ON the power
at the load.
• Turn OFF the power to the load and then turn OFF the power to the Unit.
5 Installation and Wiring
5-82
NX-series NX1P2 CPU Unit Hardware User’s Manual (W578)

Omron NX1P2 series Specifications

General

Model	NX1P2 Series
Manufacturer	Omron
Type	Controller
CPU Units	1
Program Capacity	5 MB
Data Memory Capacity	128 KB
Ethernet Ports	1
Serial Ports	1
Built-in EtherNet/IP Port	Yes
Built-in EtherCAT Port	Yes
Built-in USB Port	Yes
SD Memory Card Slot	Yes
USB Port	1
Power Supply Voltage	24 VDC
Programming Language	Ladder, Structured Text, Function Block Diagram
Communication Protocols	EtherNet/IP, EtherCAT, Serial (RS-232C)