263
GRT1-CP1-L Positioning Unit Section 7-5
Functions Shared by
All Units
Refer to the following sections for the items on the General Tab Page.
■ Default Settings
The Default Setting Button on the General Tab Page will download the default
settings for all parameters on all tabs to the Positioning Unit. The values on
the tab pages will not be updated.
Setting Digital Output
Functions
A Positioning Unit supports two digital outputs. Use the following procedure to
set functionality. The digital outputs can also be controlled according to the
counter value in comparison to user-set ranges. Refer to Range 0 and Range
1 Tab Pages on page 269 for details.
1,2,3... 1. Click the OUT Tab in the Edit Unit Parameters Window to display the OUT
Tab Page shown below.
2. Select the digital output (No. 00 or 01) and click the Edit Button. The Edit
Terminal Dialog Box will be displayed.
Function Reference
Comment 2-3-5 Unit Comments
Unit Conduction Time 2-3-4 Unit Conduction Time Monitor
Last Maintenance Date 2-3-8 Last Maintenance Date
To Next Page
Loading...
