EasyManua.ls Logo

Omron SmartSlice GRT1 Series - Page 343

Omron SmartSlice GRT1 Series
366 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
323
Explicit Messages Appendix A
Terminal
Mainte-
nance Infor-
mation
Mode Moni-
tor of Digital
Input
Read Reads the moni-
tor mode for
maintenance
information on the
digital input.
0E hex 8E hex 01 to 40
hex
*1
71 hex --- 4 bytes
Status of bit 00 of
1st byte:
0: Total ON time
mode
1: Contact opera-
tion counter mode
All other bits will
be 0.
Write Writes the moni-
tor mode for
maintenance
information for
the digital input.
10 hex 8E hex 01 to 40
hex
*1
71 hex 4 bytes
Status of bit 00 of
1st byte:
0: Total ON time
mode
1: Contact opera-
tion counter mode
Set all other bits
to 0.
---
Monitor Sta-
tus of Digital
Input Main-
tenance
Counter
Read Reads the moni-
tor status for the
total ON time or
number of contact
operations for the
digital input.
0E hex 8E hex 01 to 40
hex
*1
72 hex --- 4 bytes
Status of bit 00 of
1st byte:
0: In range
1: Out-of-range
(over the monitor
value)
Monitor Dig-
ital Output
Status
Read Reads the current
status of digital
outputs.
*2
0E hex 8E hex 01 to 40
hex
*1
OUT0:
76 hex
--- 1 byte
00 hex: OFF
01 hex: ON
Digital Out-
put Names
Read Reads the com-
ments set for digi-
tal outputs.
*2
0E hex 8E hex 01 to 40
hex
*1
OUT0:
77 hex
--- 1 to 32 bytes
Contains stored
comment in
ASCII.
Write Writes the com-
ments for digital
outputs.
*2
10 hex 8E hex 01 to 40
hex
*1
OUT0:
77 hex
1 to 32 bytes
The comment to
set in ASCII.
---
Digital Out-
put Mainte-
nance
Counter
Read Reads the total
ON time (unit: s)
or number of con-
tact operations
(unit: operations)
for digital out-
puts.
*2
0E hex 8E hex 01 to 40
hex
*1
OUT0:
78 hex
OUT1:
7C hex
--- 4 bytes
0000 0000 to
FFFF FFFF hex
(0 to
4,294,967,295
decimal)
Write Writes the total
ON time (unit: s)
or number of con-
tact operations
(unit: operations)
for digital out-
puts.
*2
0 hex 8E hex 01 to 40
hex
*1
OUT0:
78 hex
OUT1:
7C hex
4 bytes
0000 0000 to
FFFF FFFF hex
(0 to
4,294,967,295
decimal)
---
Reset Resets the total
ON time (unit: s)
or number of con-
tact operations
(unit: operations)
for digital out-
puts.
*2
05 hex 8E hex 01 to 40
hex
*1
OUT0:
78 hex
OUT1:
7C hex
--- ---
Explicit
message
Read/
write
Function Command Response
Service
code
Class
ID
Instance
ID
Attribute
ID
Data size

Table of Contents

Related product manuals