Omron SYSMAC CS Series

xii
Loop Controller Element
Note When using function component version 3.6 for LCB01, LCB03, or
LCB05, use the CX-One Auto Update function to update the CX-Pro-
cess Tool Software to version 5.23 or higher.
Loop Controller Programming Device
Functional
element name
Functional
element version
CX-Process Tool CX-Programmer
(See note.)
LCB01 Ver. 1.0 Not specific ---
Ver. 1.5 Ver. 3.2 or higher
Ver. 2.0 Ver. 4.0 or higher
Ver. 3.0 Ver. 5.0 or higher
Ver. 3.5 Ver. 5.2 or higher
Ver. 3.6 Ver. 5.2 or higher
(See note.)
LCB05 Ver. 1.0 Not specific
Ver. 1.5 Ver. 3.2 or higher
Ver. 2.0 Ver. 4.0 or higher
Ver. 3.0 Ver. 5.0 or higher
Ver. 3.5 Ver. 5.2 or higher
Ver. 3.6 Ver. 5.2 or higher
(See note.)
LCB05D Ver. 1.0 Ver. 3.2 or higher
LCB03 Ver. 2.0 Ver. 4.0 or higher
Ver. 3.0 Ver. 5.0 or higher
Ver. 3.5 Ver. 5.2 or higher
Ver. 3.6 Ver. 5.2 or higher
(See note.)