Omron SYSMAC CS1 User Manual

1-2SectionModels and System Configurations
8
1-2-4 Connecting Contact and Special I/O
Special connectors are required to connect the contact I/O and special I/O to the
connectors on the Customizable Counter Unit. These connectors are provided
with the Customizable Counter Unit and can be purchased separately. The
cables for these connectors must be provided and wired to the connectors by the
user. An OMRON Connector–Terminal Block Conversion Unit can also be used
for the special I/O. Refer to 3-3 Wiring for details.

Omron SYSMAC CS1 Specifications

General

Brand	Omron
Model	SYSMAC CS1
Category	Controller
Language	English