3-4SectionProgramming Devices
37
Programming Console Connections
Port at the
Customizable
Programming
Device
Programming
Console model
Type of network
serial
Cables
u
Counter Unit
connection
switch setting
communications
mode)
Model number Length
Peripheral port ON C200H-PRO27 Programming
Console bus
(automatic
C200H-CN222
and
CS1W-CN114
2 m and 0.05 m
recognition)
C200H-CN422
and
CS1W-CN114
4 m and 0.05 m
CS1W-CN224 2 m
CS1W-CN624 6 m
CQM1-PRO01 Cable included
with Programming
Console and
CS1W-CN114
2 m and 0.05 m
CQM1H-PRO01 (Included with
Programming
Console.)
2 m
3-4-2 CX-Programmer
The CX-Programmer versions that can be used with the Customizable Counter
Unit are given in the following table.
Name Model number Computer Serial
communications
mode
Model setting on
the
CX-Programmer
Functional
limitations
CX-Programmer
Ver. 1.2 or later
(on CD-ROM)
WS02-CXPC1-E IBM PC/AT or
compatible
OS: Microsoft
Windows 95 or 98
Peripheral bus CQM1H-CPU61 Yes
Note The functional limitations when using the CX-Programmer with the Customiz-
able Counter Unit are shown in the following table.
• Functional Limitations
Item CX-Programmer Ver. 1.2 or later
Selected device type Select CQM1H-CPU61.
Editing the PC Setup Not supported. (The settings in DM 6600 to DM 6655
must be made in the PC Memory Window.)
Memory displays Displayed for CQM1H.
Connecting Cables
Connecting to the Computer
Computer Connecting to peripheral port
IBM PC/AT or compatible
(D-sub, 9-pin male)
IBM PC/AT computer
(9-pin, male)
Customizable
Counter Unit
CS1-series
CPU Unit
Peripheral port
CS1W-CN226/-CN626
Connecting Cable
(for IBM PC/AT or
compatible)
To Next Page
Loading...
Need help?
General
