Omron SYSMAC CS1

7-6SectionPulse Outputs
98
Applicable Instructions
Instruction Control Description
(@)CTBL(63)
Range comparison One range comparison executed.
() ()
Target value comparison table
registration and starting comparison
Target value comparison table registered and comparison
started.
Target value comparison table
registration
Target value comparison table registered.
(@)INI(61)
Starting comparison Comparison started with previously registered target value
comparison table.
Stopping comparison Target value comparison stopped.
Changing PV PV of high-speed counter changed.
(@)PRV(62)
Reading high-speed counter PV PV of high-speed counter read.
() ()
Reading high-speed counter rate of
change or frequency
Rate of change or frequency of high-speed counter read.
7-5-4 Internal Circuit Configurations
Phases A and B of Pulse Input
Phase A/B internal circuits
(1) 24-V input
(2) Pulse input 1: 5-V input, Pulse input 2: 12-V input
(3) Line-driver input
–
4.4 kΩ
660 Ω/1.64 kΩ
(1)
(2)
(3)
Phase Z of Pulse Input
Phase Z internal circuits
(1) 24-V input
(2) Pulse input 1: 5-V input, Pulse input 2: 12-V input
(3) Line-driver input
–
3.0 kΩ
440 Ω/940 Ω
(1)
(2)
(3)
7-6 Pulse Outputs
7-6-1 Applicable Models
Model numbers Functions
CS1W-HCP22 12 contact inputs, 8 contact outputs, 2 pulse inputs, 2 pulse outputs
7-6-2 Outline
The CS1W-HCP22 Customizable Counter Unit provides 2 pulse outputs. The pulse out-
puts can be used for the following functions.