100
Troubleshooting
Multi-zone function
Cannot ZONE-output the audio of externally connected AV components
• To output audio from an externally connected AV component to ZONE 2, use an analog audio cable for connection. Note that ZONE 2 output is
not possible with the connection using an HDMI cable, digital coaxial cable, or digital optical cable.
Others
• If the audio signal is from the NET input selector, the zone output is not possible for DSD audio signals.
Remote Controller
• Make sure that the batteries are inserted with the correct polarity.
•
•
• If the main unit is installed in a rack or cabinet with colored-glass doors, or if the doors are closed, the remote controller may not work normally.
Display
The display does not light up
• When the Dimmer function is working, the display may go dim. Press the DIMMER button, and change the brightness level of the display.
•
( →p10, 15)
( →p10)
Others
Strange noise can be heard from the unit
•
To Next Page
Loading...
