Optex Virtual Loop - 3 Name of each Parts; Product Model Number; Unit Configuration

-4-
GT
︓
Surface mount
●Surface Mount OVS-02GT
Top cover
Sensor housing
Sensor unit
Rotates 96°
Left and right
Rubber seal
for waterproofing
Bottom cover
Conduit hole
Φ21mm (3/4in.)
Screw (for fix to Top cover)
Screw (for fix Top cover)
Name of each parts
3
Bottom screw
Top screw
3-1
Product model number
3-2
Unit configuraion
Do not use chemicals such as alcohol.
Do not wash with a high-pressure washing machine.
Maintenance
When the unit body gets dirty, wipe lightly with a damp soft brush or cloth.
If the dirt does not come off, wipe with a cloth dampened with a neutral detergent.
NOTE
The product model number denotes the product configuration as follows.
For details, see P37 "10-1 Specifications".
BL : Black
OVS-02 Mount
(Color)
Not modifiable
Never perform disassembly or modification of the unit which is dangerous.
Fire or electric shock may occur.
Do not paint or put stickers on the sensor. Ingredients in paint or sticker may influence the
sensing performance.
NOTE