Maintenance
OPTIMUM
MASCHINEN - GERMANY
© 2008
GB
Page 38 Metal belt saw S210G; S275G; S210G Vario; S275G Vario version 1.3.1 4 February 2008
every year
Drive
system
Oil change
Unscrew the oil bleed screw at the bottom of the heli-
cal gear. To collect the oil, use a suitable vessel of
sufficient capacity.
Open the filler for better ventilation.
Use viscous gear oil, e.g. Mobil 629
Illustr.6-4: Helical gear
INFORMATION
Let the metal belt saw run for a few minutes
before beginning the oil change. This will heat
the oil, making it flow more easily out of the
outlet hole.
Intervals /
When?
Where? What? How?
Filler
Helical gear
To Next Page
Loading...
