Oracle Server X6-2 User Manual

Mark the Rackmount Location
The bottom edge of the card corresponds to the bottom edge of the server. Measure up from the
bottom of the installation card.
3.
Mark the mounting holes for the front slide-rails.
4.
Mark the mounting holes for the rear slide-rails.
Related Information
■
“Rack Requirements” on page 38
■
“Install Mounting Brackets Onto the Server” on page 42
■
“Attach Tool-less Slide-Rail Assemblies” on page 47
44 Oracle Server X6-2 Installation Guide • July 2020

Oracle Server X6-2 Specifications

General

Brand	Oracle
Model	Server X6-2
Category	Server
Language	English