Connecting to Oracle ILOM
The Oracle Server X6-2 is shipped with Oracle Integrated Lights Out Manager (ILOM) version
3.2.6. Oracle ILOM is system management firmware embedded on the service processor (SP).
It provides extensive management and monitoring capabilities for the server.
For a complete list of Oracle ILOM features, refer to the Oracle Integrated Lights Out Manager
(ILOM) 3.2 Documentation Library at https://www.oracle.com/goto/ilom/docs.
This section describes how to access and get started using Oracle ILOM for your server.
Description Links
Learn about Oracle ILOM hardware and interfaces. “Oracle ILOM Service Processor and User
Interfaces” on page 80
Log in to Oracle ILOM locally using a terminal
connected to the serial port.
“Logging In to or Out of Oracle ILOM” on page 80
Log in to Oracle ILOM over the network using an
Ethernet connection.
“Log In to Oracle ILOM Using a Remote Ethernet
Connection” on page 81
View or modify the service processor network settings. “Modifying the Service Processor Network Settings Using
Oracle ILOM” on page 84
Test the network configuration. “Test the IPv4 or IPv6 Network
Configuration” on page 87
Access the host console using Oracle ILOM. “Redirecting the Host Console Using Oracle
ILOM” on page 88
Troubleshoot the service processor connection. “Troubleshooting Oracle ILOM” on page 92
Related Information
■
“Installation Procedure Overview” on page 13
■
“Connecting Cables and Power Cords” on page 74
Connecting to Oracle ILOM 79
To Next Page
Loading...
Need help?
General