Oracle Server X6-2 User Manual

Cabling the Server and Applying Power
This section contains procedures for connecting data and server management cables and power
cords to the server.
Description Links
Review connector port locations. “Rear Cable Connections and Ports” on page 71
Learn about server Ethernet ports. “Ethernet Ports” on page 73
Connect data cables and power cords to the server. “Connecting Cables and Power Cords” on page 74
Power on the server. “Powering On the Server” on page 76
Related Information
■
“Installation Procedure Overview” on page 13
■
“Install the Cable Management Arm” on page 56
■
“Connecting to Oracle ILOM” on page 79
Rear Cable Connections and Ports
The following figure shows the locations of cable connectors and ports on the back of the
Oracle Server X6-2 and the cables and devices that you typically connect to them.
Cabling the Server and Applying Power 71

Oracle Server X6-2 Specifications

General

Brand	Oracle
Model	Server X6-2
Category	Server
Language	English