Oracle Server X6-2 User Manual

Install the Cable Management Arm
5.
If necessary, lay any cables protruding from the server back panel into the cable
trough.
Install the Cable Management Arm
Follow this procedure to install the cable management arm (CMA), which you can use to
manage cables connected to the rear of the server.
Note - Before installing the cable management arms (CMAs), ensure that the right-angle AC
power cables are long enough to connect to the rack-mounted servers when routed through the
CMAs.
1.
Unpack the CMA.
The following figure shows the CMA components.
56 Oracle Server X6-2 Installation Guide • July 2020

Oracle Server X6-2 Specifications

General

Brand	Oracle
Model	Server X6-2
Category	Server
Language	English