Powering On the Server
Use a Velcro strap to secure the power cords to the power supply handle as shown in the
following figure.
Caution - Damage to Server Components: Do not operate the server unless all fans,
component heak sinks, air baffles, and the top cover are installed.
Related Information
■
“Rear Cable Connections and Ports” on page 71
■
“Ethernet Ports” on page 73
Powering On the Server
This section explains how to power on the server locally using a serial connection and Oracle
ILOM.
76 Oracle Server X6-2 Installation Guide • July 2020
To Next Page
Loading...
