Test the IPv4 or IPv6 Network Configuration
Test the IPv4 or IPv6 Network Configuration
Use either the Oracle ILOM web interface or CLI to test the IPv4 or IPv6 network
configuration:
1.
From the Oracle ILOM web interface:
a.
From the ILOM Administration → Connectivity screen, click the Tools button
at the bottom of the screen.
The Network Configuration Test screen appears.
b.
From the Test Type list box, select Ping (for an IPv4 configuration) or Ping6
(for an IPv6 network configuration).
c.
Type the IPv4 or IPv6 test destination address in the Destination field and
click Test.
If the test was successful, the message Ping of ip_address succeeded message appears
below the Destination field in the Network Configuration Test screen.
2.
From the Oracle ILOM CLI:
Connecting to Oracle ILOM 87
To Next Page
Loading...
Need help?
General