5 - 33
HANDLEBER
4. Install:
Collar ①
Grip cap cover ②
Throttle grip ③
NOTE:
Apply the lithium soap base grease on the
throttle grip sliding surface.
5. Install:
Throttle cables ①
To tube guide ② .
NOTE:
Apply the lithium soap base grease on the
throttle cable end and tube guide cable wind-
ing portion.
6. Install:
Throttle cable cap ①
Screw (throttle cable cap) ②
WARNING
After tightening the screws, check that the
throttle grip ③ moves smoothly. If it does
not, retighten the bolts for adjustment.
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
7. Install:
Grip cap cover ①
Cover (throttle cable cap) ②
To Next Page
Loading...