_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for
IDEA
vacuum packing machines
Pag. 28 a 76
ICON OR
PICTOGRAM
DESCRIPTION
USER CYCLES: Access to Vacuum + Gas Med preset cycle. To be used to vacuum
pack products to be protected from crushing, thanks to 40% injection of GAS
USER CYCLES: Access to Vacuum + Gas Max preset cycle. To be used to vacuum
pack products to be protected from crushing, thanks to 50% injection of GAS
USER CYCLES: Access to External vacuum (in channelled bags) preset cycle. To be
used to vacuum pack, in channelled vacuum bags, solid products which size exceeds
the chamber size
USER CYCLES: Access to Only sealing preset cycle. To be used to operate only sealing
in vacuum bags.
Scroll through the list of cycles
Vacuum parameter setting
Additional vacuum parameter setting
Gas injection parameter setting
Sealing parameter setting
Softair parameter setting
Stop the vacuum cycle in advance
To access the parameter settings menu
Return to the previous screen
Pressed for 5”, allows to activate the printing function (optional)
Return to the previous screen without saving the programmed parameters
Allows to increase or decrease the values of set parameters
Name the program
Save the parameters settings and come back to previous screen.
Copy a program
_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for
IDEA
vacuum packing machines
Pag. 29 a 76
ICON OR
PICTOGRAM
DESCRIPTION
Delete a program
JAR CYCLES: Access to editable programs. The user can set the required vacuum
level.
JAR CYCLES: Access to JAR Min preset cycle. To be used to re-pack screw cap jars.
Only cap sealing
JAR CYCLES: Access to JAR MED preset cycle. To be used to operate partial vacuum
in professional containers, implosion resistant; for foodstuff to be pasteurized or
sterilized.
JAR CYCLES: Access to JAR MAX preset cycle. To be used to operate maximum
vacuum in professional containers
9.2 USER CYCLES
N° Description
1
Access to editable programs
2
Access to preset user programs
To Next Page
Loading...
