Orved IDEA 40 - Advanced Operation Modes

_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 42 a 76
10
Pressing STOP button at any time, it is possible
to interrupt the vacuum cycle immediately
and the vacuum chamber is uncompressed.
The lid opens automatically.
The machine comes back to the selected
program.
11
End of cycle. The lid opens automatically.
Remove the packed products, paying attention not to touch the sealing bar, as it may be still hot
9.4 Degas cycles – progressive vacuum cycles
N° Description
1
Cycle name: from DEGAS 1 to DEGAS 5
2
Set value
3
Enter the sealing time setting menu
Anticipate the sealing
4
Phase progress display bar
5
Enter the single step setting menu (vacuum and pause)
Marinade in bags
_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 43 a 76
9.4.1 Parameter settings
9.4.2 Single step parameter settings
N° Description
1
Allows to activate the step (button becomes white) and to
enter the vacuum setting menu and step pause
2
Allow to switch from step 1 to 8 and vice versa
3
Set value
4
Allows to modify the sealing time
5
Allows to enter the sealing time setting menu