OTARI MX-5050 - The MX-5050 Series Overview

Section 1 Introduction
1 - 2
May 1992
MX-5050 Operation and Maintenance Manual
1.1 The New MX-5050 Series
The features of the MX-5050 Series tape recorders are described below.
The new MX-5050 Series is divided into the following models:
MX-5050 B III -F Full Track, 1/4" Track Width
MX-5050 B II I-2 2 Channel, NAB 1/4" Track Width
MX-5050 B II I-2E 2 Channel, DIN 1/4" Track Width
MX-5050 BQ III 4 Channel, 1/4" Track Width
MX-5050 MK IV 2 2 Channel, NAB 1/4" Track Width
MX-5050 MK IV 2E 2 Channel, DIN 1/4" Track Width
MX-5050 MK IV 4 4 Channel, 1/2" Track Width
MX-5050 MK IV 8 8 Channel, 1/2" Track Width
This manual describes the MX-5050 MK IV- 2, 2E, BIII-F, BIII-2 and B III-2E
models.
Figure 1-1
Exterior Appearance
BIII MKIV-2