Disassembly
14 900-0054-01-00 Rev A
Sep ar at i n g t h e Heat Si n k f r o m t he Po w er Bo ar d
Place the charge cont roller upside down and remove t he seven screws circled in whit e
in
Figure 13, on
t he left . Do not remove t he four cradle screws and washers identified with t he
X
sym bol i n
Fi gure 13
on
the right.
Figure 13 Bottom/Cradle Screw Removal
Figure 14 Removing Remaining Screws
Continued on next page.
Do NOT Remove the screws
ident ified here wit h an “X”.
2. Remove the last three (3)
remaining screws, circled
in whit e in Figure 14.
To Next Page
Loading...
