Palm m100 Series - Page 128

Chapter 5 Using Your Basic Applications
120
To view the time:
Do one of the following:
■
When your handheld is on, tap the Clock icon in the upper-left corner of the
Graffiti writing area, or tap the Applications icon , and then tap the Clock
icon .
■
When your handheld is off, press the up scroll button. To activate the backlight
while viewing the time, hold down the up scroll button for a few seconds.
To set an alarm:
1.
Tap the Applications icon .
2.
Tap the Clock icon .
3.
Tap the Alarm box to open the Set Alarm dialog box.
4.
Tap the time columns to set the hour and minute.
5.
When the alarm reminder message appears, do one of the following:
Tap OK to permanently dismiss the reminder and return to the current screen.
Tap Snooze to dismiss the reminder and return to the current screen. The
reminder message appears again in five minutes, and an attention indicator
blinks in the upper-left corner of the screen to remind you of the pending alarm.
When the reminder message reappears, the current time displays in the
Reminder bar and the alarm time displays on the screen.
6.
Tap Go To to open Clock.