Chapter 6 Advanced HotSync
®
Operations
136
5.
Adjust the following options as needed.
6.
Close the HotSync Software Setup window.
Preparing your handheld
There are a few steps you must perform to prepare your handheld for a modem
HotSync operation.
To prepare your handheld for a modem HotSync operation:
1.
Tap the Applications icon .
2.
Tap the HotSync icon .
3.
Tap Modem.
Modem
Identifies the type of modem connected to your computer. If
your modem does not appear on the list, use the Hayes Basic
setting, or choose Custom to enter a command string. Refer to
the manual that came with your modem to find the appropriate
command string.
Port
Identifies the port that Palm Desktop software uses to
communicate with the modem. Select the modem or printer port
where you connected the modem cable.
Modem Speaker
Activates the modem’s speaker. If you are having trouble
connecting, turn on this option to make sure the modem
connected to your computer is responding to incoming calls.
To Next Page
Loading...
Need help?
General
