Installing and removing applications
47
9.
If you need to change the destination of the application you are installing, click
Change Destination on the Install Handheld Files window, and then use the
arrows to move applications between your handheld and an expansion card.
10.
Click OK to close the Change Destination window.
11.
Close the Install Handheld Files window.
12.
Perform a HotSync operation to install the selected application(s) on your
handheld. See “Exchanging and updating data: HotSync operations” in
Chapter 5 for details.
NOTE
Files that remain in the list after you perform a HotSync operation did
not install. This can happen if the file type was not recognized during the
HotSync operation. Expansion cards may hold applications that use files other
than the Palm application files. In order for your handheld to recognize such a
file, you must launch the application that uses these files at least once.
Removing applications
In the event that you run out of memory or decide that you no longer need an
application you installed, you can remove applications from your handheld or
from an expansion card. From your handheld, you can remove only add-on
applications, patches, and extensions that you install; you cannot remove the
applications that reside in the ROM portion of your handheld.
To remove an add-on application:
1.
Tap the Applications icon .
2.
Tap the Menu icon .
3.
Tap App, and then tap Delete.
4.
Tap the Delete From pick list and select either Handheld or Card. To delete
applications from a card, the card must be seated in the expansion card slot.
To Next Page
Loading...
Need help?
General
