Chapter 7 Setting Preferences for Your Handheld
154
NOTE
The Phone Setup dialog box works correctly for AT&T and Sprint long-
distance services. However, because MCI works differently, MCI customers need to
put the calling card number in the Phone # field and the phone number in the Use
calling card field.
To enter your server phone number:
1.
Tap the Phone field.
2.
Enter the phone number for your ISP or dial-in server.
3.
If you need to enter a prefix or disable Call Waiting, skip to those procedures.
Otherwise, tap OK.
Entering a prefix
A prefix is a number that you dial before the telephone number to access an outside
line. For example, many offices require that you dial “9” to dial a number outside
the building.
To enter a prefix:
1.
Tap the Dial Prefix check box to select it.
2.
Enter the prefix.
3.
Tap O K.
Disabling Call Waiting
Call Waiting can cause your session to terminate if you receive a call while you are
connected. If your telephone has Call Waiting, you need to disable this feature
before logging into your ISP or dial-in server.
Enter your ISP phone
number here
Enter your
prefix here
Select this
box if you
need to use a
prefix
To Next Page
Loading...
