Palm m100 Series User Manual

Network preferences and TCP/IP software
157
To select a connection type:
1.
Tap the service field.
2.
Tap Details.
3.
Tap the Connection type pick list and select one of the following connection
types:
NOTE
If you are not sure, try PPP; if that doesn’t work, ask your Internet
Service Provider or your System Administrator for the correct connection type.
Idle timeout
The Idle timeout setting defines how long your handheld waits before dropping
the connection with your ISP or dial-in server when you switch out of a TCP/IP
application.
To set the Idle timeout:
1.
Tap the Idle timeout pick list and select one of the following options:
2.
Tap O K.
PPP
Point-to-Point protocol
SLIP
Serial Line Internet Protocol
CSLIP
Compressed Serial Line Internet
Protocol
1 minute
Waits one minute for you to open another application before it
drops the connection.
2 minutes
Waits two minutes.
3 minutes
Waits three minutes.
Never
Keeps your PPP or SLIP connection until you turn off your
handheld (or until it times out). This option works best with the
PalmModem accessory.
Select connection type

Palm m100 Series Specifications

General

Brand	Palm
Model	m100 Series
Category	Handhelds
Language	English