Palm m100 Series User Manual

Network preferences and TCP/IP software
161
4.
Repeat steps 2 and 3 until the login script is complete.
5.
Tap O K.
Wait For
Tells your handheld to wait for specific characters from the TCP/IP
server before executing the next command.
Wait For
Prompt
Detects a challenge-response prompt coming from the server and
then displays the dynamically generated challenge value. You
then enter the challenge value into your token card, which in turn
generates a response value for you to enter on your handheld.
This command takes two arguments, separated by a vertical bar
(|) on the input line.
Send
Transmits specific characters to the TCP/IP server to which you are
connecting.
Send CR
Transmits a carriage return or LF character to the TCP/IP server to
which you are connecting.
Send User ID
Transmits the User ID information entered in the User ID field of
the Network Preferences screen.
Send
Password
Transmits the password entered in the Password field of the
Network Preferences screen. If you did not enter a password, this
command prompts you to enter one. The Password command is
usually followed by a Send CR command.
Delay
Tells your handheld to wait a specific number of seconds before
executing the next command in the login script.
Get IP
Reads an IP address and uses it as the IP address for your
handheld. This command is used with SLIP connections.
Prompt
Opens a dialog box and prompts you to enter text of some kind
(for example, a password or a security code).
End
Identifies the last line in the login script.

Palm m100 Series Specifications

General

Brand	Palm
Model	m100 Series
Category	Handhelds
Language	English