Common tasks
73
To perform a local HotSync operation on a Windows computer:
1.
Connect your handheld to the cradle/cable.
2.
If the HotSync Manager is not running, start it: On the Windows desktop, click
Start, and then choose Programs. Navigate to the Palm Desktop software
program group and choose HotSync Manager. Alternatively, you can start the
Palm Desktop software which automatically opens the HotSync Manager.
3.
Press the HotSync button ™
on the cradle/cable.
IMPORTANT
The first time you perform a HotSync operation, you must enter a
user name in the New User dialog box and click OK. Every handheld should have
a unique name. To prevent loss of a user’s records, never try to synchronize more
than one handheld to the same user name.
Shown with a cradle.
Some models use a
cable in place of the
cradle.
HotSync
button
To Next Page
Loading...
