- 116 -
Switch the picture quality of motion pictures to be recorded with this unit.
Depending on the settings of [REC MODE], the available [REC FORMAT] settings differ.
≥ When [MOV] or [MP4] in [REC MODE] is selected
[REC FORMAT]
How to read a [REC FORMAT] setting
Items that make up a [REC FORMAT] setting represent Size, Vertical resolution, Frame rate,
and Bit rate. (Excluding the [REC FORMAT] settings that are available when [REC MODE] is set
to [AVCHD])
A Size
B Vertical resolution
C Frame rate
D Bit rate
≥ Smoother motion picture can be recorded with the higher value for the frame rate. [i] and [p] of
the frame rate means interlace and progressive respectively.
Interlace (interlacing scanning)
Video signal that divides the effective scanning lines to half and send them alternatively
Progressive (progressive scanning)
High density video signal sending the effective scanning lines simultaneously (It will be higher
quality image than the interlace.)
≥ The higher the bit rate value is, the higher the picture quality becomes.
≥ It can record with highest quality image in this unit when set to [FHD 1080/59.94p 50M].
≥ Depending on the [REC MODE] setting and the bit rate of the [REC FORMAT] setting, its
required Speed Class of the SD card differs. Use an SD card that meets the settings. For
details, refer to “About the Speed Class ratings for recording motion pictures” on page 27.
Recording format
Size
(Picture size)
Frame rate Bit rate (VBR)
[FHD 1080/59.94p 50M]
FHD
(1920k1080)
59.94p
Average 50 Mbps
[FHD 1080/29.97p 50M] 29.97p
[FHD 1080/23.98p 50M] 23.98p
[FHD 1080/59.94i 50M] 59.94i
FHD 1080 / 59.94p 50M
R68S3_PJPB.book 116 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
