Panasonic AG-AC30 - Gain adjustment

- 55 -
Gain adjustment
≥ Use the jog dial to change the settings.
≥ Switch to Manual Mode. (l 42)
1 Press the GAIN button to switch to Manual Gain Mode.
≥ The gain value will be displayed in dB.
2 Adjust the gain by rotating the jog dial.
Gain value:
0dB to 30dB
≥ Value closer to 0dB darken the image.
≥ Value closer to 30dB brighten the image.
≥ To return to Auto Gain Mode, press the GAIN button or set this unit to Intelligent Auto Mode using
the iA/MANU switch.
≥ It is not possible to adjust the GAIN in the following situations:
j When a setting in [SCENE MODE] is enabled (l 112)
j During Freeze Frame (l 71)
≥ If the gain value is increased, the noise on the screen increases.
≥
In Auto Iris Mode or Auto Shutter Mode, the screen brightness may not change even if you adjust the
gain. (
l 53, 57)
∫ Changing the maximum possible gain value for Auto Gain Mode
≥ Switch to Manual Mode. (l 42)
Select the menu.
≥ [AGC LIMIT] is not available when a setting in [SCENE MODE] is enabled. (l 112)
A Gain value
≥ In Auto Gain Mode, “AGC” is displayed; in Manual Gain Mode, the gain value is displayed in dB.
B [GAIN]
: [SW SETUP] # [AGC LIMIT] # desired setting
[3 dB]/[6 dB]/[9 dB]/[12 dB]/[15 dB]/[18 dB]/[21 dB]/[24 dB]/[27 dB]/[30 dB]


SEL/
PUSH
SET
GAIN

0dB

1 Jog dial
2 GAIN button
MENU
R68S3_PJPB.book 55 ページ ２０１６年９月２日 金曜日 午前１０時４３分