- 62 -
You can change a counter display that indicates how much time has elapsed during recording or
playback.
1 Touch the LCD monitor while the recording
screen is displayed.
≥ Operation icons will be displayed.
2 Touch to switch the counter display.
≥ The display will be switched in the following order:
Time Code # Recording Counter # Off
Setting the Time Code
Time code will display the recording time in hours, minutes, seconds, and frames.
TC 00:00:00:00 (hour : minute : second : frame [NDF])
TC 00:00:00.00 (hour : minute : second . frame [DF])
≥ The number of frames (frame count per second) varies depending on the frame rate in
[REC FORMAT]. (l 116)
Recording
Counter display
Counter display Indications
Time Code TC 00:00:00:00 or TC 00:00:00.00
≥ Display will change depending on the setting of the
[DF MODE]. (l 63)
Recording Counter (l 64) (In Recording Mode)
0:00:00 or SCN 0:00:00
(In Playback Mode)
SCN 0:00:00
≥ In Recording Mode, display will change depending on the
setting of the [REC COUNTER].
≥ In Playback Mode, display will return to SCN 0:00:00 for
each scene.
Frame rates Frame
59.94p/59.94i/29.97p 0 to 29
23.98p 0 to 23
RESET COUNT
DISP/
MODE
O.I.S. BARS
ZEBRA
COUNT
R68S3_PJPB.book 62 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
