- 126 -
This allows the recording of an image and audio to start before you press the recording start/stop 
button. AVCHD scenes will be recorded from approximately 3 seconds before the operation, while 
MOV/MP4 will be recorded from approximately 4 seconds before the operation. (l 75)
Selects the compensation mode for the time code. (l 63)
Sets the way the time code will move. (l 63)
Initial value of the time code can be set. (l 64)
Audio Setup
All default settings are indicated with underlined text.
Reduces the level of low-pitched sound for audio channel 1.
≥ You may not see the full effect depending on the recording conditions.
Reduces the level of low-pitched sound for audio channel 2.
≥ You may not see the full effect depending on the recording conditions.
Switches the adjustment method of the audio recording level for audio channel 1. (l 60)
[PRE-REC]
[ON]/[OFF]
[DF MODE]
[DF]/[NDF]
[TCG]
[FREE RUN]/[REC RUN]
[TC PRESET]
: [AUDIO SETUP] # desired setting
[AUDIO LOW CUT CH1]
[ON]/[OFF]
[AUDIO LOW CUT CH2]
[ON]/[OFF]
[AUDIO LEVEL CH1]
[AUTO]/[MANUAL]
MENU
R68S3_PJPB.book  126 ページ  2016年9月2日 金曜日 午前10時43分