- 63 -
Select the compensation mode for the time code.
Select the menu.
≥ This item will be set to [NDF] automatically in following cases:
j When the frame rate in [REC FORMAT] is 23.98p (l 116 )
j During the Interval Recording (l 125)
Sets the way the time code will move.
Select the menu.
* If the frame rate in [REC FORMAT] is set to 23.98p, a slight time error may occur when switching
to Playback Mode. (l 116)
≥ [FREE RUN] is automatically selected during PRE-REC. (l 75, 126)
≥ It is automatically set to [REC RUN] in following cases:
j During Super Slow Recording (l 76)
j During the Interval Recording (l 125)
≥ The time code will reset when the built-in lithium battery is exhausted when it is set to
[FREE RUN].
[DF MODE]
: [RECORD SETUP] # [DF MODE] # desired setting
[DF]: Time code is compensated in accordance with the actual time. It is
mainly used for broadcasting such as TV programs.
[NDF]: It will not compensate the time code. (There will be a difference from
the actual time)
[TCG]
: [RECORD SETUP] # [TCG] # desired setting
[FREE RUN]*: It will constantly move.
[REC RUN]: It will move only when recording.
MENU
MENU
R68S3_PJPB.book 63 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
