- 147 -
When an error is detected immediately after this unit is turned on or while it is being operated, the
status indicator and on-screen displays inform you of the error.
Display
Warning Indications
System error
Status indicator It flashes once per second.
On-screen display s
Meaning of the warning
A reference signal error or
communication error has occurred.
Recording/playback The operation stops.
Solution
Turn off and on this unit. If the warning
persists, consult your dealer.
The battery is
depleted
(Low input voltage)
Status indicator It flashes once per second.
On-screen display
The message [LOW BATTERY.] is
displayed.
Meaning of the warning The battery is depleted.
Recording/playback
The operation stops. This unit turns off
automatically.
Solution
Charge or replace the battery.
Connect the AC adaptor to cancel the
warning.
The card is full
Status indicator s
On-screen display
The remaining recordable time flashes
red when it reaches [R 0h00m].
Meaning of the warning The SD card capacity is full.
Recording/playback The recording stops.
Solution
Delete unnecessary scenes, or use a
new SD card.
Recording error
Status indicator It flashes once per second.
On-screen display s
Meaning of the warning
A recording error or recording circuit
setting error has occurred.
Recording/playback
The recording may either continue or
stop.
Solution
Turn off and on this unit. If the warning
persists, consult your dealer.
R68S3_PJPB.book 147 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
