- 42 -
≥  appears on the screen in Intelligent Auto Mode.
∫ Intelligent Auto Mode
When switching to Intelligent Auto Mode, the Automatic Tracking White Balance and Auto Focus 
operate and automatically adjust the color balance and focusing.
Depending on the brightness of the subject etc., the Iris, gain and shutter speed are automatically 
adjusted for an optimum brightness.
≥ Color balance and focus may not be adjusted automatically depending on light sources or 
scenes. If so, manually adjust these settings. (l 46, 51)
≥ The following settings in Manual Mode are canceled when you switch to Intelligent Auto Mode:
j Focus (l 46)
j Focus Assist (l 48)
j White Balance (l 51)
j Iris (l 53)
j GAIN (l 55)
j Shutter speed (l 57)
j [SCENE MODE] (l 112)
≥ When you switch this unit from Manual Mode to Intelligent Auto Mode, Image Stabilizer will be set 
to  /  ([ON]). (l 80)
≥ If you set the Image Stabilizer to   (setting canceled) in Manual Mode and then switch to 
Intelligent Auto Mode, the Image Stabilizer setting that is selected when you switch to Manual 
Mode again will be determined by whether or not you touch the operation icon   in Intelligent 
Auto Mode.*
* In the same way, the Image Stabilizer setting is also determined by whether or not you press the 
USER button to which [O.I.S.] is registered.
Recording
Intelligent Auto Mode/Manual Mode
iA/MANU switch
Slide the switch to change the Intelligent Auto 
Mode/Manual Mode.
MANU
When the operation icon   is pressed
or the USER button to which [O.I.S.] is 
registered is pressed
The Image Stabilizer setting in Intelligent 
Auto Mode will be applied.
When the operation icon   is not pressed
or the USER button to which [O.I.S.] is 
registered is not pressed
The Image Stabilizer will be set to   
(setting canceled).
R68S3_PJPB.book  42 ページ  2016年9月2日 金曜日 午前10時43分