- 153 -
About recovery
If faulty management information is found, the messages may appear and a repair is performed.
(Repairing may take time depending on the error.)
≥ is displayed when abnormal management information is detected when the scenes are
displayed in thumbnail.
≥ Use a sufficiently charged battery or the AC adaptor.
≥ Depending on the condition of the data, it may not be possible to completely repair the data.
≥ If recovery fails, it will not be possible to play back scenes recorded before the unit turned off.
≥ When data recorded on another device is recovered, it may not be possible to play back the data
on this unit or the other device.
≥ If recovery fails, turn the unit off and on again after waiting awhile. If recovery fails repeatedly,
format a media on the unit. Please be aware that if a media is formatted, then all the data
recorded on the media will be erased.
≥ If the thumbnail information is recovered, displaying the thumbnails may become slower.
Check the version of the camera in the main menu # [MAINTENANCE] # [VERSION], access the
latest information on the firmware from the website described below, and then download the
firmware as needed.
≥ Update completes by loading the downloaded files to the camera via the SD card. For details on
update, visit the support desk at the following website:
http://pro-av.panasonic.net
Others
Updating the firmware incorporated
into the unit
R68S3_PJPB.book 153 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
