- 30 -
The viewfinder is turned off and the LCD monitor is turned on when the LCD monitor is extracted.
The viewfinder is turned on when the LCD monitor is retracted.
Switching between the LCD monitor and viewfinder
displays
Select the menu. (l 36)
∫ To change the setting with a USER button
You can change how to display the LCD monitor and Viewfinder by registering “LCD/EVF Output” to
a USER button.
≥ This function is registered to the USER1 button by default.
≥ Please refer to page 65 for details about setting the USER button.
When the recording screen is displayed, press the USER button to which [LCD/
EVF OUTPUT] is registered.
≥ Switches the setting each time the button is pressed.
[LCD] !# [EVF]
≥ The setting is also applied to the [LCD/EVF OUTPUT] menu setting.
≥ [LCD] will be selected when the LCD monitor is extracted.
Preparation
Using the LCD monitor/Viewfinder
: [OUTPUT SETUP] # [LCD/EVF OUTPUT] # desired setting
[LCD]: The LCD monitor is turned on when the LCD monitor is extracted. The viewfinder is
not turned on.
[EVF]: The viewfinder turns on. The LCD monitor does not turn on.
MENU
R68S3_PJPB.book 30 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
