- 33 -
It adjusts brightness and color density on the LCD monitor.
1 Select the menu. (l 36)
2 Touch the desired setting item.
3 Touch / to adjust settings.
≥ You can select a value between s16 and r16.
4 Touch [RETURN].
≥ Touch [EXIT] to exit the menu screen.
≥ This item is not available while the LCD monitor is turned off. (l 30)
Viewfinder adjustment
≥ These settings will not affect the images actually recorded.
It adjusts the field of view to show the image on the viewfinder clearly.
1 Adjust the viewfinder to suit your vision so
that you can see the display images clearly.
≥ Be careful not to trap your fingers when moving the
viewfinder.
≥ The viewfinder can be lifted vertically up to
approximately 90o.
≥ Turn on the viewfinder.
2 Adjust the focus by operating the eyepiece
corrector lever.
Brightness of the viewfinder can be switched.
Select the menu. (l 36)
[LCD SET]
: [DISP SETUP] # [LCD SET]
[COLOR]: Color level of the LCD monitor
[BRIGHTNESS]: Brightness of the LCD monitor
[CONTRAST]: Contrast of the LCD monitor
Adjusting the field of view
[EVF SET]
: [DISP SETUP] # [EVF SET] # [BRIGHT]/[NORMAL]/[DARK]
MENU
A Eyepiece corrector lever
MENU
R68S3_PJPB.book 33 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
