- 119 -
User switch
All default settings are indicated with underlined text.
Sets the function to assign to the USER buttons. (l 65)
≥ For the functions of the USER button that can be registered, refer to page 66.
≥ The default settings are as follows:
j USER1: [LCD/EVF OUTPUT]
j USER2: [BACKLIGHT]
j USER3: [O.I.S.]
j USER4: [FOCUS ASSIST 1]
j USER5: [REC CHECK]
Register functions to USER button icons. (l 65)
≥ For the functions of the USER button that can be registered, refer to page 66.
≥ The default settings are as follows:
j USER6: [FRZ FRAME]
j USER7: [EVF/LCD DETAIL]
j USER8: [ATW LOCK]
j USER9: [MENU]
Switches the display of the set USER button icons. (l 66)
: [USER SW] # desired setting
[USER1]/[USER2]/[USER3]/[USER4]/[USER5]
MENU
[USER6]/[USER7]/[USER8]/[USER9]
[USER BUTTON DISPLAY]
[ON]/[OFF]
R68S3_PJPB.book 119 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
