Panasonic AG-AC30 - Using Operation Icons

- 79 -
You can use convenient functions just by the easy operation of touching the screen.
1 Touch the LCD monitor in the recording
screen.
≥ The operation icons are displayed.
2 Touch an operation icon.
≥ The following function is available. Refer to the respective
pages for the operation.
≥ If you touch the screen while an operation icon is being displayed or do not touch the icon for a
certain period, it will disappear. To display again, touch the screen.
Switching the screen indications/mode information
display
You can hide screen indications other than the counter display, zebra display, marker display, and
safety zone display. (l 140)
Touch .
≥ To cancel this display mode, touch again.
∫ To display the Mode Information
If you touch and hold , a list of functions assigned to the USER buttons (USER1 to USER5)
and the settings of [SUB REC BUTTON] and [SUB ZOOM] are displayed.
≥ If the screen is touched while mode information is displayed or no touch operation is performed
for a specific period of time, the information will disappear.
Recording
Using Operation Icons
Resets the counter (l 64)
Counter display (l 62)
Switching the screen indications/mode information display
Image Stabilizer Function (l 80)
Color Bar Screen (l 80)
Zebra (l 81)
, etc.
USER Button Icon (l 65)
RESET COUNT
DISP/
MODE
O.I.S. BARS ZEBRA
PRE-REC
ATW.L
MENU
DRS
RESET
COUNT
DISP/
MODE
O.I.S.
BARS
ZEBRA
DRS
PRE-REC
DISP/
MODE
DISP/
MODE
DISP/
MODE
R68S3_PJPB.book 79 ページ ２０１６年９月２日 金曜日 午前１０時４３分