- 32 -
How to use the touch screen
You can operate by directly touching the LCD monitor (touch screen) with your finger.
∫ Touch
Touch and release the touch screen to select icon or
picture.
≥ Touch the center of the icon.
≥ Touching the touch screen will not operate while you
are touching another part of the touch screen.
∫ Slide while touching
Move your finger while pressing on the touch screen.
∫ About the operation icons
///:
Touch when changing a page or performing settings.
≥ Do not touch the LCD monitor with hard pointed tips, such as ball point pens.
LCD monitor adjustment
≥ These settings will not affect the images actually recorded.
This makes it easier to view the LCD monitor in bright places including outdoors.
Select the menu. (l 36)
≥ When the AC adaptor is in use, [POWER LCD] is set to [+1] automatically.
≥
[POWER LCD] will be automatically fixed to [0] when the built-in LED light is turned on, even if it is set to [+1].
≥ [0] is selected when:
j [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (l 103)
≥ This item is not available while the LCD monitor is turned off. (l 30)
[POWER LCD]
: [DISP SETUP] # [POWER LCD] #
[+1] (Makes brighter)/[0] (Normal)/[-1] (Makes less bright)
MENU
R68S3_PJPB.book 32 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
