- 56 -
You can use Super Gain by registering [SUPER GAIN] to a USER button.
Super Gain allows you to set the gain value to 33 dB or 36 dB.
≥ Please refer to page 65 for details about setting the USER button.
≥ Switch to Manual Mode. (l 42)
Press the USER button to which [SUPER GAIN] is registered or touch the
applicable USER button icon.
≥ To cancel Super gain, press the USER button or touch the USER button icon again.
∫ To change the gain value of Super Gain
Select the menu.
≥ Super Gain is not available in the following cases:
j In Intelligent Auto Mode
j When a setting in [SCENE MODE] is enabled (l 112)
j During Freeze Frame (l 71)
≥ Super Gain will be canceled when the unit is turned off.
Super Gain
: [SW SETUP] # [SUPER GAIN] # desired setting
[33 dB]/[36 dB]
R68S3_PJPB.book 56 ページ ２０１６年９月２日 金曜日 午前１０時４３分
To Next Page
Loading...
