Panasonic DVCPRO AJ-CA901P - Removal of the Top Plate; Removal of the Triax Connector

DIS-6
Disassemble of RF Unit
1. Removal of the Top Plate
1. Unscrew the 17 screws (A).
2. Unscrew the 2 screws (B), and remove the Upper
Plate.
2. Removal of the Triax Connector
1. Unscrew the 4 screws (C).
2. Disconnect the connector (J3) .
Disassemble of Power Supply
Unit
1. Removal of the Top Plate
1. Unscrew the 9 screws (A).
2. Unscrew the 6 screws (B)
3. Remove the Upper Plate carefully.
Note : Assemble procedures are reverse of the
disassemble procedures.
(C)
(C)
(A)
(A)
(B)
(B)
(B)
(A)
(A)
(A)
(A)
(A)
(B)
(J1)