Panasonic FPG-PP21 Technical Manual

240 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Table of Contents

Other manuals for Panasonic FPG-PP21

User Manual332 pages

Questions and Answers:

K
keithsmithAug 17, 2025
Why is the ERROR/ALARM LED on my Panasonic FPG-PP21 Controller ON?
- T
  Tyrone CollinsAug 17, 2025
  If the ERROR/ALARM LED is ON because the system watchdog timer has been activated, set the mode selector of the Panasonic Controller from RUN to PROG mode and turn the power off and then on. If the ERROR/ALARM LED turns on again, there is probably an abnormality in the CPU. Please contact your dealer. If the program execution time is too long, set the mode selector from PROG to RUN mode. If the ERROR/ALARM LED turns on, check if instructions such as JP or LOOP are programmed in such a way that a scan can never finish. Also, make sure that interrupt instructions are executed in succession. Finally, check if the ERROR/ALARM LED is flashing.
E
ehicksAug 20, 2025
What to do if Input indicator LEDs are ON in Panasonic Controller?
- K
  Kristopher DelacruzAug 20, 2025
  If the input indicator LEDs are ON, monitor the input condition using FPWIN Pro. If the input monitored is TRUE, check the leakage current at the input devices and check the program again. Also, check for duplicate output errors and for outputs having been rewritten by high-level instructions. Check the program flow when instructions such as MC or JP are used. If the input monitored is FALSE, please contact your dealer.
M
Martin StewartAug 22, 2025
What to do if Input indicator LEDs are OFF in Panasonic FPG-PP21 Controller?
- S
  Sean FrazierAug 23, 2025
  If the input indicator LEDs are OFF, check the wiring of the input devices and check that the power is properly supplied to the input terminals. If the power is not supplied to the input terminal, check the input device and input power supply. If the power is properly supplied to the input terminal, please contact your dealer.
K
Kathryn FrancisAug 26, 2025
What to do if Output indicator LEDs are OFF in Panasonic FPG-PP21 Controller?
- H
  hudsonleslieAug 26, 2025
  If the output indicator LEDs are OFF, monitor the output condition using FPWIN Pro. If the output monitored is TRUE, set the output to TRUE by force using FPWIN Pro. If the output indicator LED remains OFF, please contact your dealer.
M
mayslindaAug 28, 2025
How to fix ERROR/ALARM LED flashing on Panasonic FPG-PP21 Controller?
- J
  James StoneAug 28, 2025
  If the ERROR/ALARM LED is flashing on your Panasonic Controller, choose [Clear] in the PLC Status dialog box while in PROG mode. Alternatively, turn the power supply off/on while in PROG mode (this clears all of the contents of the operation memory except hold type data). As another option, execute the self-diagnostic error set instruction F148_ERR.
K
Kathleen LoganAug 31, 2025
Why are all LEDs OFF on my Panasonic FPG-PP21?
- J
  Jeff HamiltonAug 31, 2025
  If all LEDs are OFF on your Panasonic Controller, check the power supply wiring. Also, check if the power supplied to the CPU is in the range of the rating and be sure to check the fluctuation in the power supply. If the power supplied to the CPU is shared with other devices, disconnect the power supply wiring to the other devices. If the LEDs on the CPU turn on at this moment, increase the capacity of the power supply or prepare another power supply for other devices. Please contact your dealer for further information.
J
Jonathan FoxSep 2, 2025
What to do if outputs do not function correctly on Panasonic FPG-PP21?
- M
  Miss Nancy Jackson DDSSep 2, 2025
  To troubleshoot output malfunctions in your Panasonic Controller, first, check the wiring of the loads. Then, check if the power is properly supplied to the loads. If the power is properly supplied to the load, check the load again for any abnormalities. If the power is not supplied to the load, please contact your dealer.
A
Andrew ThompsonSep 5, 2025
How to fix Panasonic FPG-PP21 Controller PROG Mode when it does not Change to RUN?
- S
  Shannon JonesSep 5, 2025
  If the PROG mode does not change to RUN on your Panasonic Controller, check to see if the ERROR/ALARM LED is flashing. Locate the syntax error by executing Monitor ? PLC Status.
K
Kristina BrownSep 7, 2025
How to resolve Password Protection Error Message on Panasonic FPG-PP21 Controller?
- M
  Mark WalshSep 8, 2025
  To resolve password protection errors on your Panasonic Controller, navigate to Online ? Security Settings. Then, enter your password under "PLC Access" and choose [Login].

Panasonic FPG-PP21 Specifications

General

Power Supply	24 V DC
Number of control axes	2
CPU	32-bit RISC
I/O Points	16 inputs, 8 outputs
Communication Ports	RS-232C
Operating Temperature	0°C to 55°C
Weight	300 g

Related product manuals

Panasonic FPG-PP22

Panasonic FPG-C24R2

Panasonic FPG-C32TH

Preview: Panasonic FPG Series

Panasonic FPG Series

Panasonic FPG-C28P2H

Panasonic FPG-C32T2H

Panasonic FPG-C24R2H

Panasonic FPG-COM2-A

Panasonic FPG-COM4-A

Panasonic FPG-C32T2H-A

Panasonic FPG-XY64D2P-A

Panasonic FPG-XY64D2T-A