Dimensions and Driver Wiring FP2 Positioning Unit
17-10
17.2.7 Motor Driver I/F Terminal Ⅱ
-Unit type
Product name Product number
1-axis type AFP8503
Motor Driver I/F Terminal Ⅱ
2-axis type AFP8504
-Positioning unit which can be used
Product name Product number
2-axis type AFP2434 FP2 Positioning unit
Multhfunction type
4-axis type AFP2435
1-axis type AFPG432 FPSigma Positionin unit
2-axis type AFPG433
-Related products
Product name Product number
0.5m AFP85100 Cable for FP2 Positioning unit
1m AFP85101
1m AFP85131
Cable for MINAS AⅢ series
2m AFP85132
1m AFP85141 Cable for MINAS S series
2m AFP85142
-Parts and Dimension
The asterix ( →* ) below indicates the following:
AX1 and AX2; AX(3) and AX(4) which you can see at the PWB of the I/F terminal, both share the same
connector slot at the FP2 positioning unit side. (for PP22 type and PP42 type)
When the user will use the 3 and 4 axis connection from the FP2 positioning unit, the AX(3) and AX(4)
can be used for this.
Note: Number 3 and 4 are parenthesized at the I/F terminal.
To Next Page
Loading...
