Panasonic FPG-PP21

FP∑ Positioning Unit Wiring
3-5
3.2 Input /Output Specifications and Out put terminal
Layout
3.2.1 Input /Output Specifications
1-axis type uses the connector pins for only 1-axis type. The signal pins for 2 axes are assigned to a
connector. Between the Transistor type and the Line driver type, the pulse output terminal performace is
different, but the input terminal and the power supply terminal are in the same specifications.
Output terminals （Transistor Output type）
Pin number
1 - axis 2 - axis
Circuit Signal name Item Description
A1 A10
Pulse output A:
5V DC output
Output format Open collector
B1 B10
Pulse output A:
Open collector
Operating voltage
range
4.75 V DC to
26.4 V DC
A2 A11
Pulse output B:
5V DC output
Max. load current 15 mA
B2 B11
Pulse output B:
Open collector
Output
Specifications
ON Max. voltage
drop
0.6 V