Pulser Input Operation FP∑ Positioning Unit
11-12
11.6 Types of Manual Pulse Generators That Can be Used
A pulse generators should be used for which the number of output pulses is “25P/R” (25 pulses
per cycle).
With the “100P/R” (100 pulses per cycle) type, four pulses are output per click, and operation may not be
accurate in some cases.
A line driver output type is recommended.
A transistor open collector output type or transistor output type with pull-up resistance may be used.
For detailed information about connection methods →section 3.7
To Next Page
Loading...
